Microprocessor operation panel which brings much more simple and precise control and performance.
With built-in gas regulator which is easier to set up the machine.
With 2T/4T and post gas adjustment to meet different cutting demand.
Narrow cutting seam, smooth appearance, less transmutation
Compatible with network or generator use
Auto-protection against over voltage and over heat
| Model | CUT100C |
| Input Voltage | AC380V±15% 3PH |
| Input voltage frequency （HZ） | 50/60 |
| Rated input power capacity（KVA) | 15.1 |
| Rated input current （A） | 23 |
| No-load voltage（V） | 285 |
| Output current range（A） | 5-100 |
| Rated output voltage(V) | 120 |
| Pre-flow(S) | |
| Post-gas(S) | |
| Duty cycle （%） | 60 |
| Power factor | 0.93 |
| Insulation class | F |
| Arc- striking | non-contact |
| Air pressure ( M Pa) | 0.6 |
| Gas flow（L/min） | 210 |
| Suggested cutting thickness（mm） | 30 |
| Cutting Thickness ( mm) | 40 |
| Weight（KG) | 28.3 |
| Dimension（mm） | 500×280×435 |
